Perforated
Support Baskets
Type 316 stainless steel perforated baskets
accommodate filter bag sizes #1, 2, 4, and 5. The hemispherical
shaped bottom fully supports our filter bags. Staggered
pattern, perforated holes (9/64” diameter) maximize
the usable surface area of any filter bag and provide
greater basket strength than straight-line pattern perforations.
Filtration Systems support baskets have a longitudinal
taper to assist with filter bag removal. Support baskets
are required when using liquid filter bags. |
|
|
|
Mesh
and Micron Lined Baskets
These reusable baskets
provide liquid straining and filtering at various
levels of mesh and micron requirement. Fully welded
construction assures that no particle bypass occurs
around the welded seam of the mesh or micron lining.
The lining is supported by the perforated outer wall
of the basket, making it extremely durable. Ideally
suited for high temperature applications and/or aggressive
service, baskets are constructed of T-316 stainless
steel and include a Buna gasket.
Mesh: 20, 30, 40, 50, 60,
70, 80, 100, 150, 200 Industrial Service
Micron: 40, 90, 160, 250 Industrial
Service
5, 10, 15, 25 Light-Duty, Specialty Use
|
|
Perforated
Strainer Baskets
Heavy-duty perforated baskets convert size
#1, 2, 4, and 5 filter vessels into high-capacity liquid
strainers. When our filter housings are used with strainer
baskets they allow heavy dirt loading at high flow rates.
Perforated strainers are reusable, and may be pressure
cleaned, if required. To maximize the usable surface area
of the strainer basket, holes are punched in a staggered
pattern. Constructed of T-304 stainless steel, strainers
have a lift-out handle and a solid, flat bottom. For finer
filtering applications, Mesh and Micron Lined Baskets
are available. Strainer Baskets are available with the
following perforations:
1/2" |
3/8" |
1/4" |
3/16" |
9/64" |
3/32" |
1/16" |
3/64" |
(.500) |
(.375) |
(.250) |
(.1875) |
(.1407) |
(.0938) |
(.0625) |
(.0469) |
|
|
|
|
Type 316 stainless
steel (8x8 mesh) basket accommodates filter bag sizes
#1 and 2. These baskets have a tapered, cone-shaped
bottom.
|
|
Canister
Baskets
This accessory basket is used with a filter
bag in a Filtration Systems housing to hold granular materials,
such as activated carbon, diatomaceous earth, or resins.
The addition of granular materials during the filtration
process can alter the composition of liquids passing through
the charged canister. For example, liquid polishing to
remove odor, taste, and color can be accomplished using
granular, activated carbon. To maximize the life of the
granular material and prevent channeling, Canister Baskets
include a liquid diffuser to promote a spray effect. This
T-316 stainless steel basket has a solid wall and a perforated
bottom. |
|
|
|
This reusable strainer can be placed
inside a filter bag as a prefilter to capture larger
particles upstream of the bag, providing dual-stage
filtration within a single housing. The prefilter
basket can be removed from the housing, independent
of the bag, and emptied, to provide extended filter
bag life. Constructed of perforated T-316 stainless
steel, the prefilter has a 90, 160, or 250 micron-rated
liner.
Backwash
Insert (B)
This basket fits into the filter
bag, allowing backwash operations. The Backwash
Insert prevents the filter bag from collapsing when
the flow is reversed. It is constructed of 9/64”
perforated T-316 stainless steel.
|
|
American
Felt & Filter, GAF/ISP Support Baskets and Specialty
Baskets
Perforated or Mesh Support Baskets and
Specialty Baskets for AM/RB Series #1 and 2 size filter
vessels are constructed of T-316 stainless steel. Specialty
Baskets include Strainers, Mesh and Micron Lined Baskets,
Canister Baskets, and Cartridge Chambers. These baskets
require two O-Rings that fit into machined grooves on
the top and the bottom of the basket flange. Bullet
Bottom Baskets
Our newly patented basket promotes "Lateral
Fluid Dispersion", resulting in increased solids
loading capacity, and greater differential pressure capabiltiy
of the filter bag. This specialty support basket is T-316
S/S, has a perforated wall, and a solid hemispherical
bottom. Available in size #1 and 2.
|
|
|
Contact
the Heneveld Group to find out how your company can
utilize Filtration Systems's support baskets, strainers,
and accessory baskets.
|
