|
|
Perforated Support
Baskets
Type 316 stainless steel perforated baskets accommodate
filter bag sizes #1, 2, 4, and 5. The hemispherical shaped bottom
fully supports our filter bags. Staggered pattern, perforated holes
(9/64" diameter) maximize the usable surface area of any filter bag
and provide greater basket strength than straight-line pattern
perforations. Filtration Systems support baskets have a
longitudinal taper to assist with filter bag removal. Support
baskets are required when using liquid filter bags. |
|
|
|
|
Mesh and Micron Lined
Baskets
These reusable baskets provide
liquid straining and filtering at various levels of mesh and micron
requirement. Fully welded construction assures that no particle
bypass occurs around the welded seam of the mesh or micron lining.
The lining is supported by the perforated outer wall of the basket,
making it extremely durable. Ideally suited for high temperature
applications and/or aggressive service, baskets are constructed of
T-316 stainless steel and include a Buna gasket.
Mesh: 20, 30, 40, 50, 60, 70, 80, 100,
150, 200 Industrial Service
Micron: 40, 90, 160, 250 Industrial Service
5, 10, 15, 25 Light-Duty, Specialty Use
|
|
|
Perforated Strainer
Baskets
Heavy-duty perforated baskets convert size #1, 2, 4, and 5
filter vessels into high-capacity liquid strainers. When our filter
housings are used with strainer baskets they allow heavy dirt
loading at high flow rates. Perforated strainers are reusable, and
may be pressure cleaned, if required. To maximize the usable
surface area of the strainer basket, holes are punched in a
staggered pattern. Constructed of T-304 stainless steel, strainers
have a lift-out handle and a solid, flat bottom. For finer
filtering applications, Mesh and Micron Lined Baskets are
available. Strainer Baskets are available with the following
perforations:
|
1/2"
|
3/8"
|
1/4"
|
3/16"
|
9/64"
|
3/32"
|
1/16"
|
3/64"
|
|
(.500)
|
(.375)
|
(.250)
|
(.1875)
|
(.1407)
|
(.0938)
|
(.0625)
|
(.0469)
|
|
|
|
|
|
Type 316 stainless steel (8x8
mesh) basket accommodates filter bag sizes #1 and 2. These baskets
have a tapered, cone-shaped bottom.
|
|
|
Canister
Baskets
This accessory basket is used with a filter bag in a
Filtration Systems housing to hold granular materials, such as
activated carbon, diatomaceous earth, or resins. The addition of
granular materials during the filtration process can alter the
composition of liquids passing through the charged canister. For
example, liquid polishing to remove odor, taste, and color can be
accomplished using granular, activated carbon. To maximize the life
of the granular material and prevent channeling, Canister Baskets
include a liquid diffuser to promote a spray effect. This T-316
stainless steel basket has a solid wall and a perforated
bottom. |
|
|
|
 
|
This reusable strainer can be placed inside a filter bag
as a prefilter to capture larger particles upstream of the bag,
providing dual-stage filtration within a single housing. The
prefilter basket can be removed from the housing, independent of
the bag, and emptied, to provide extended filter bag life.
Constructed of perforated T-316 stainless steel, the prefilter has
a 90, 160, or 250 micron-rated liner.
Backwash Insert
(B)
This basket fits into the filter bag, allowing backwash
operations. The Backwash Insert prevents the filter bag from
collapsing when the flow is reversed. It is constructed of 9/64"
perforated T-316 stainless steel.
|
|
|
American Felt &
Filter, GAF/ISP Support Baskets and Specialty
Baskets
Perforated or Mesh Support Baskets and Specialty Baskets for
AM/RB Series #1 and 2 size filter vessels are constructed of T-316
stainless steel. Specialty Baskets include Strainers, Mesh and
Micron Lined Baskets, Canister Baskets, and Cartridge Chambers.
These baskets require two O-Rings that fit into machined grooves on
the top and the bottom of the basket flange.
Bullet Bottom
Baskets
Our newly patented basket promotes "Lateral Fluid
Dispersion", resulting in increased solids loading capacity, and
greater differential pressure capabiltiy of the filter bag. This
specialty support basket is T-316 S/S, has a perforated wall, and a
solid hemispherical bottom. Available in size #1 and 2.
|
|
|
Contact the Heneveld
Group to find out how your company can utilize
Filtration Systems's support baskets, strainers,
and accessory baskets.
|
